Power Electronics Process Control Energy Monitoring Engineering Services

Engineering and Site Services
    Design and Development
     
  • Custom Thyristor/Diode/Transistor Heat Sink Assemblies.
  • Thyristor Power Controllers (OZtherm) for all types of Heating and Rectification applications.
  • Measurement solutions for Temperature and AC/DC electrical parameters.
  • Custom designed solutions in Power Electronics, Process Control, Energy Monitoring and AC/DC switching applications.
  • Control cubicles and project work.
    Fully equipped development laboratory to support the;-
     
  • Testing of Power Electronic products, High Power Diodes, Thyristors (SCR's), IGBT's and Solid State Relays.
  • Fault analysis of High Power Semiconductors to define their failure mode in order to resolve field problems.
  • Calibration, testing, upgrade and repair of Temperature Controllers and Chart Recorders.
  • Production testing, upgrade and repair of all Fastron OZtherm Power Controllers and other Fastron supplied products.
  • Calibration of Analogue and Digital Meters primarily used in the measurement of a wide range of electrical parameters.
    Laboratory Facilities include;-
     
  • 3 Phase 415VAC, 200A utility supply to provide a high power testing facility with auxiliary transformers to provide higher currents and higher voltages as required.
  • Wide range of load banks, air cooled and water cooled.
  • LEM 0620 Semiconductor tester for testing and checking high power diodes, thyristors, IGBT's and other similar devices.
  • Schuster Tester for Power Semiconductor testing complementing the LEM tester capabilities.
  • High Power Microscope for examining damaged silion wafers to ascertain the likely cause of failure in high power semiconductors.
  • Powerscope, Memory scope, Bench Power Supplies, Counters, Waveform Generators, 5kV Impulse tester, Phase Shifter, Specialized Test Rigs.
 
    Site Services
     
  • Emergency on-site Repair and Maintenance services specializing in faultfinding on equipment or systems utilizing Power Semiconductors, Heat Sink Assemblies, Thyristor (SCR) Controllers, Process Instruments, Temperature Controllers, Meters, Transducers and Sensors.
  • Commissioning of our own range of products and solutions.
  • Measurement solutions for Temperature and AC/DC electrical parameters.
  • Custom designed solutions in Power Electronics, Process Control, Energy Monitoring and AC/DC switching applications.
  • Control cubicles and project work.

    Applications Support
     
  • Selection of the correct component, product or solution across the whole range of Fastron supplied products.
  • Specializing in Power Semiconductors, Heat Sink Assemblies, Thyristor (SCR) Controllers, Process Instruments, Temperature Controllers, Meters, Transducers and Sensors.

    Repair/Refurbishment & Maintenance Replacement Service
     
  • Fastron specialize in supplying emergency breakdown parts and a comprehensive repair and refurbishment service, whether the original part was supplied by Fastron or a different manufacturer.
  • Power Semiconductors; Thyristors, Diodes, IGBT's, Solid State Relays.
  • Thyristor (SCR) Controllers.
  • Power Semiconductor Heat Sink Assemblies/WaterCoolers.
  • Semiconductor Protection Fuses.
  • Temperature Controllers.
  • Chart Recorders.
  • Digital Meters.
  • Transducers.
  • Thermocouples/RTD's/Sensors.

    Power Semiconductor Testing
     
  • Testing Power Semiconductors to determine devices that are out of specification. (Generally not viable unless device is >50A).
  • Selecting critical parameters such as Gate Current, Volt Drop, Holding Current and Peak Inverse Voltage for example.
  • Microscopic examination of the silicon wafer to ascertain the likely cause of failure. (Applies to "Puk" devices > 200A).
  • Recommend replacements.

    Testing to Specifcation, Upgrade and Repair
     
  • All in-house designed products and instruments imported by us.
  • Third Party Products on a job by job basis.

    Training
     
  • Fully equipped presentation, demonstration and training facility.
  • Specialized advice to explain the correct component or product selection for a particular application including guidelines for installation, commissioning and fault finding as applicable across all Fastron designed and imported products.
  • Specific training courses can be prepared to meet your requirements.
  • Free telephone applications advice and product demonstrations always available.

 
Ph: +61-3-9763-5155   Fax: +61-3-9763-5166   Email: sales@fastron.com.au