|
F901 Loop Powered Transmitter
|
Supplier
Fastron
Datasheets
F901 Series
|
- Two wire transmitter, 24VDC loop powered, non isolated type, 4-20mA output.
- Inputs available, K, J, ma, DC Voltage, 10K Pot.
- Linearisation and cold junction compensation supplied as standard on the thermocouple types.
- F300 Phase Angle Controllers are available in Single Phase & Three Phase, AC switch & DC Bridge configurations.
- F400 Burst Controllers are available in Single Phase & two leg & full three leg control of Three Phase.
- Wide range of options.
- Custom designs
- Applications advice
- Typically used for power control in electric heating and controlled rectifiers.
|
| |
|
F902 24VDC Loop Power Supply
|
Supplier
Fastron
Datasheets
F902 Series
|
- F902 DIN Rail mount, 24VDC Loop Power Supply.
- Operates from 24VAC, 110VAC, 240VAC or 415VAC supplies.
- Delivers 160mA output at 24VDC.
- For use with loop powered transmitters such as the F901 or as a general purpose power supply.
|
| |
|
F911 Hall Effect Sensor Current/Voltage Trip
|
Supplier
Fastron
Datasheets
F911 Series
|
- F911 Hall Effect DC/AC current/voltage sensor and current/voltage trip functions are integrated into one unit.
- Measures up to 100Amps/500V with on board current sensor (Greater currents can be measured with separate external Hall Effect Sensor).
- 0-10V and 4-20mA retransmission outputs can be used simultaneously for independent measurement and logging.
- Trip level is adjustable and output is a N/O contact provided as standard.
- An external reset can also be provided.
- Unit can be used as an electronic shear pin.
- Requires a +/- 15V supply from the F912 Module, shown below.
|
| |
|
F912 Power Supply
|
Supplier
Fastron
Datasheets
F912 Series
|
- F912 Power Supply designed for providing +/- 15V for Hall Effect Sensors up to 160mA.
- Input voltages available include 24V,110V,240V,415V AC and 24VDC.
|
|
